Modesta Maintenance M3 Fire - Water Spot Remover 200ml

Safely removes water spots and mineral deposits.
Designed for Modesta ceramic coatings.
Restores gloss and surface clarity.
Ideal for maintenance and correction preparation.
Controlled strength for professional use.
Trusted Modesta aftercare solution.

Modesta M3 Fire - Water Spot Remover is highly effective, quick product to remove water spot issues from coated (and other) surfaces in a regular maintenance scenario. Safe for automotive and marine paint, polycarbonates (i.e. headlights or motorcycle windshields), plastics, trim, glass, ceramic, stone and other surfaces. Easy to use under all conditions, easy to wipe off with no residue and smearing and minimal product usage. Safe to use and specifically designed for Modesta coatings.

Maintains and conditions coatings of the Modesta line. Used to remove light water spots on the top of the protection layer.

Modesta M3 FIRE Water Spot Remover is the only product of it's kind on the market that is close to pH neutral!

Product Name: Modesta M3 Fire
Type: Water Spot & Mineral Deposit Remover
Safe On: Paint, ceramic coatings, glass, clear coat
Action: Mineral and limescale removal
Finish: Clean, clear, restored
Use: Spot treatment / coating maintenance
Brand: Modesta

1. Thoroughly wash the vehicle to remove all dirt and contamination. The vehicle should be at least semi-dry after washing, therefore either dry the vehicle or blow off water with compressed air.

2. Apply to a microfiber and spread. Apply two sprays of M3FIRE to a clean, high quality microfiber and spread evenly on the affected parts of the surface. You should not spray directly onto the surface to avoid exposure of unwanted areas! Wipe off and repeat if necessary.

3. Wash off thoroughly with plenty of water, best with a pressure washer.

Additional information:

Always ensure that surface is properly cleaned before application. Do not apply to contaminated and dirty surfaces. Test on an inconspicuous place
before applying. Never apply at windy or dusty place, in rain, direct sunlight or heat. Surface should have mild (room) temperature before application.
Avoid working in too cold or too hot environments. Apply at well-ventilated place.
Do not apply on recently repainted parts. If you are using Modesta on a new car or a car that has been painted, make sure that the paint is properly
cured before application. In some cases, the paint on new cars might still be fresh and not fully cured. If you are unsure about the curing stage of the
paint then you should wait 4-8 weeks after the vehicle was handed over to you.
Do not combine with other products than those recommended.
Apply only to painted surfaces - never apply to glass, unpainted plastic parts, tires or rubber.

SDS M3 Fire